Daewoo ST Series Istruzioni per gli Interventi Pagina 93

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 92
<Tightening order>
(1) First stage : Coat engine oil over bolts
(2) Second stage : Temporary screw the bolt about 1 ~ 2 threads
(3) Third stage : With torque wrench, tighten at about 10 kg
.
m
(4) Fourth stage : With torque wrench, tighten up to about 15 kg
.
m
(5) Fifth stage : Finally, tighten in the specified torque 18kg
.
m with torque wrench .
Move the bearing cap with hand, and
release and reassemble it if no move-
ment is detected.
6.3.16. Relief valve
Assemble the relief valve.
6.3.17. Oil pump and oil pipe
Install a dowel pin in the No.7 bearing
cap, then assemble the oil pump with
specified torque.
Assemble the oil suction pipe with the
delivery pipe, then install the bracket
on the bearing cap.
- 90 -
EAMD094I
EAMD036I
Torque 18 kg
.
m
Torque 4.4 kg
.
m
Vedere la pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 182 183

Commenti su questo manuale

Nessun commento